At the time of this writing, only Quick Sync via an Intel GPU is supported. Send guests a link to join your live broadcast. Conferencing and Remote Production Rendezvous peer-to-peer conferencing comes built-in to Wirecast. Make all your sources available for streaming. Note: This may change in the future, as the Apple API decides what hardware acceleration method is to be used. Wirecast is compatible with input from cameras, microphones, webcams, IP cams, capture cards, and more. Apple Hardware Accelerated H.264 encoding requires a Mac with an integrated Intel GPU.NVIDIA only maintains a general list of supported GPUs NVIDIA NVENC encoding requires an NVidia GPU with Kepler architecture or newer.Intel Quick Sync Video encoding requires an Intel CPU with an Intel® QuickSync Video core.Maintained system CPU usage greater than 60% will increase the likelihood of dropped frames.Consider lowering your canvas frame rate and/or streaming resolution to lower CPU usage.Simply switching to a higher frame-rate without ensuring the CPU and bitrate are sufficient may result in a lower quality encode.High frame-rate streaming will result in increased CPU usage and require a higher bit rate (4Mbps or higher) for a quality encode.More demanding workflows may require a more capable CPU. For the best experience, we suggest considering the following table when choosing hardware:ĤBased on a single simultaneous stream of 720p30 x264 4.0Mbps.ĥBandwidth per guest will scale downwards as more are added to maintain reliability.ĦMinimum recommended processor with example stream 4. Wirecast Rendezvous uses WebRTC technology that can be very resource intensive. In these cases, please contact the Manufacturer directly or refer to Wirecast Support Forum. Some of these devices are listed in our Manufacturer-tested and User-reported lists. However, our technical Support staff does not have the information necessary to troubleshoot problems. PLEASE NOTE: Devices not listed below, or qualified by our QA team as supported, may work with Wirecast. Once verified, they will be added to this "Capture Card Support" list. Telestream is continually testing and qualifying new devices. Teradek Cube is also supported through the Wirecast Source SDK.Ĭapture cards are a great way to add additional input ports into your computer and offload some of the real-time processing of incoming footage.Wirecast Pro also supports web streams which support network video ingest over the Apple Bonjour protocol.Wirecast Pro is also compatible with web/IP/security cameras and network devices.Wirecast Pro now accepts RTMP, RTMPS, RTMP(e), RTSP, HTTP, and MMS streams directly with properĬredentials and stream keys (if required). ![]() Wirecast Cam, a free iOS app for Wirecast 6, lets you use any iPhone (4s or newer) or iPad on your WiFi network as an ingest source into Wirecast. ![]() Most Standard Definition (SD) and High Definition (HD) consumer, "prosumer" and professional-grade cameras, decks and video sources with composite, S-video, Firewire, component, SDI, HD-SDI, or HDMI outputs should work with Wirecast through a qualified capture card. Composite, S-Video, DV/HDV, Component, SDI, HD-SDI, HDMI Sources
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |